9154100 2N Helios IP - OEM Audio Kit

Registered trade customers only can see price

SKU# :

9154100

SKU

9154100

2N Helios IP Audio Kit 2N® Helios IP Audio Kit is an OEM intercom intended for incorporation into a variety of devices. It is designed to add value to both audio communication and remote surveillance and control. With it, users get both live support and the ability to ask for advice at the touch of a button. A VoIP solution you don’t have to develop Simple DIN rail mounting A wide range of connectors
Technical Support >>

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

2N IP OEM Audio Kit

Technical Parameters

Signalling protocol
SIP 2.0 (UDP)
Audio stream
RTP/RTSP Protocols
G.711 Codecs
Volume control:	adjustable, with auto adaptive mode
Full duplex:	Yes (AEC)
Power supply
From an external source:	Typically 12V DC (9-36V DC), max. 2A
PoE:	802.3af (Class 0 – Max. 12.95 W)
LAN interface
LAN interfaces available:	1
PoE:	802.3af
Parameters:	10/100BASE-TX with Auto-MDIX, RJ-45
Recommended wiring:	Cat-5e or better
Supported protocols:	SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog
Audio interface
Microphone input:	Basic electric microphone
Amplifier output:	Amplifier class D, output MONO, THD < 1% Max. 10W/4Ω Max. 5W/8Ω Max. 2.5W/16Ω
Line output:	600Ω
Buttons/keypad interface
Number of buttons:	Up to 16 independent buttons in a 4 x 4 matrix
Matrix outputs:	4 (ROW1-4 connectors), Uout<0,1V (L), Uout>3,2V (H), max. 8mA
Matrix inputs:	4 (COL1-4 connectors), Uin< 1,15 (L), Uin> 2,15V, max. Uin = 5V

LED indicator outputs
Number of outputs:	3 (LED1+-, LED2+- and LED3+- connectors)
Output current:	Typically 20mA
Output voltage:	Max. 12V (note. 1)
Digital outputs
Number of outputs:	2 (OUT1+- and OUT2+- connectors)
Type of outputs:	Power output with short circuit protection
Output voltage:	12V (note. 1)
Active switch output:	7 to 11 V DC depending on Power supply (PoE: 10 V; adapter: source voltage minus 2 V, max. 11 V DC), max 400 mA
Logical inputs
Number of inputs:	2 (IN1+- and IN2+- connectors)
Input type:	Galvanically isolated inputs (optocouplers)
Characteristics:	Uin < 1,1V (L), Uin > 3V (H), max. Uin = 32V
Relay output
Number of outputs:	1 (NC, NO, COM connectors)
Limiting parameters:	(DC) Max. 30VDC/1A
Limiting parameters:	(AC) Max. 125VAC/0.3A
Mechanical properties
Operating temperature:	-40°C – 55°C
Operating relative humidity:	10%-95% (non-condensing)
Storage temperature:	-40°C – 70°C
Dimensions:	142x98x34 mm (order number 9154100), 138x90x26 mm (order number 9154101)
Weight:	max. 280g (order number 9154100), max. 150g (order number 9154101)
Ingress Protection:	IP20 (order number 9154100), IP00 (order number 9154101)
Mounting:	on wall, or DIN rail
	Note 1: If the device is supplied connected to a DC voltage source and the power supply voltage is below 12V, then the output voltage is limited to the value of the supply voltage.