9160342 RFID Access Unit 2.0 (13.56 MHz / NFC)

Registered trade customers only can see price

SKU# :

9160342

SKU

9160342

The 2N^® Access Unit 2.0 RFID is an IP access unit based exclusively on IP technology. It combines the functions of a traditional door controller and an RFID reader. Reads cards with 13.56 MHz frequencies.

Minimum wiring requirements
Same design as IP intercoms

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Features & Benefits

MINIMUM WIRING REQUIREMENTS

A single ethernet cable is all you need to ensure communication with the unit and power (PoE). You can also connect a door lock, exit button, door contact or motion sensor just as easily directly to the unit.
SAME DESIGN AS IP INTERCOMS

The access control unit will impress you with its elegant appearance, which has the same design as 2N IP intercoms. The unit comes in nickel or black and can be installed on the wall or flush mounted.
NFC SUPPORT

Thanks to wireless NFC technology, you can easily open the door using a smartphone with the 2N^® Mobile Key application installed.
ADVANCED EVENT REPORTING

The 2N^® Access Unit 2.0 RFID not only allows logs to be sent to the Syslog server, but also e-mail notifications to building security or an HTTPs command to a third-party system for selected events.
MONITORING ENTRANCES AND EXITS

Other expansion modules (e.g. an exit RFID reader, keypad, or Bluetooth etc.) can be connected to the 2N^® Access Unit 2.0 RFID, allowing you to secure a door easily from both sides.

Specifications

Technical Parameters

Interfaces
Power supply:	PoE and/or 12V/1A DC
PoE:	802.3af (Class 0–12.95W)
LAN:	10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling:	Cat-5e or better
Active switch output:	8 to 12V DC/max 600mA
Passive switch:	NO/NC contacts, up to 30V/1A AC/DC
Inputs:	2 inputs - in passive/active mode (-30V to +30V DC)
	OFF = open or Uin> 1.5V
	ON = short-circuit or Uin< 1.5V
Tamper switch:	native part of the 2N Access Unit 2.0
Audio:	buzzer (97dBA)
Supported protocols:	DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID card reader
Supported frequencies:	13.56MHz variant
13.56MHz:	ISO14443A, ISO14443B, NFC support
	reads UID (CSN)
	reads PACs ID (HID iClass cards with SIO object)

Mechanical properties
Frame:	robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature:	-40°C to +60°C
Storage temperature:	-40°C to +70°C
Operating relative humidity:	10%-95% (non-condensing)
Dimensions:	Wall (surface) mounting frame:
	- 1 module: 107 (W) x 130 (H) x 28 (D) mm
	Flush mounting frame:
	- 1 module: 130 (W) x 153 (H) x 5 (D) mm
	Flush mounting box (minimum hole):
	- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:	max 0.8kg
Cover rating:	IP54 and IK08
Extension modules
	2N Access Unit 2.0 supports modules from the 2N^® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.

Technical Parameters

Audio
Speaker:	0.8 W / 8 Ω
Interfaces
Power supply:	12V ±15% / 2A DC or PoE
PoE:	per standard 802.3af (Class 0 - 12.95W)
LAN:	10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45
Recommended wiring:	Cat5e or better
Passive switch:	NC/NO contacts, max 30 V 1 A AC/DC
Active switch output:	8 to 12 V DC / max 550 mA
Inputs:	3 inputs – can be used in passive or active mode (-30 V to + 30 V DC)
RFID card reader
Supported frequency:	13.56MHz & 125 kHz
Supported 13.56 MHz cards (only the serial number of the card is read - UID):	ISO14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX, Ultralight, Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic Advant
	ISO14443B: Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K, PicoPass, HID iCLASS
Supported NFC devices:	smartphones with NFC (HCE support required) and the 2N^® Mobile Key application, only for Android 4.3 or higher
Supported 125 kHz cards:	EM4100, EM4102, HID Prox

Expansion modules
Modules from the intercom 2N^® Helios IP Verso:	RFID card reader (125kHz; 13.56MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported
Mechanical properties
Frame:	Rugged zinc die-cast with surface finish
Operating temperature:	-40°C – 60°C
Operating relative humidity:	10%-95% (non-condensing)
Storage temperature:	-40°C – 70°C
Coverage level:	IP54
Mechanical resilience:	IK08
Dimensions:	Frame for surface mounting:
	- 1 module: 107 (W) x 130 (H) x 28 (D) mm
	Frame for recessing in wall:
	- 1 module: 130 (W) x 153 (H) x 5 (D) mm
	Box for recessing in wall (dimensions of minimum hole in wall):
	- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:	max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration)