2N ACCESS UNIT M TOUCH KEYPAD & RFID

Details

Great for projects with two-factor authentication. During working hours, employees swipe their RFID cards. Outside these hours, employees must also enter a PIN code. The reader is also great for scenarios when you generate one-off access codes for visitors. The keypad is backlit, so you can install it in dark places. The 2N^® Access Unit M Touch Keypad & RFID can read cards with frequencies of 125 kHz and 13.56 MHz.

Specifications

Power supply
Type	PoE and/or 12 V/1 A DC
PoE	802.3af (Class 0–12.95 W)
Interfaces
LAN	10/100 BASE-TX Auto-MDIX, RJ-45 male (2,9m pigtail)
Recommended cabling	Cat-5e or better
Active switch output	8 to 12 V DC/max 600 mA
Passive switch	NO/NC relay, 30V 1A AC/DC
Inputs	2 inputs – in passive / active mode(-30 VDC to + 30 VDC)
	OFF = OPEN or Uin > 1.5 V
	ON = CLOSED or Uin < 1.5 V
Tamper switch	native part of the 2N Access Unit M
Audio	buzzer, 1 W/8ohm
Supported protocols	DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies	125kHz and 13.56MHz variant
125 kHz	EM4xxx
13.56 MHz	reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N^® Mobile Key)
	reads secured MIFARE^® DESFire^® EV2/EV3 cards using 2N^® PICard technology

Touch Keypad
Technology	capacitive touch technology
	high touch layer sensitivity (0.1pF)
Reliability	regular automatic calibration (SmartSence Auto-tunning)
	does not detect false touches on wet surface
Signalling	configurable backlight intensity
	indication using multicoloured LEDs
	acoustic response for every keypad touch
Mechanical Properties
Frame	tempered glass with rugged plastic
Operating temperature	-40°C to +60°C
Storage temperature	-40°C to +70°C
Operating relative humidity	10%-95% (non-condensing)
Dimensions	50 (W) x 133 (H) x 27 (D) mm
	Flush installation box:
	40 (W) x 127 (H) x 68 (D) mm
	Surface mount box:
	27 (W) x 134 (H) x 52 (D) mm
Weight	max 0.5 kg
Cover rating	IP55 and IK07