AVProedge MXNet Evolution II 1G Encoder/Transmitting Device with AVDM Downmixing

Registered trade customers only can see price

SKU# :

AC-MXNET-1G-AVDM-EV2

SKU

AC-MXNET-1G-AVDM-EV2

MXNet 1G Evolution II HDMI Encoder with Audio Downmixing

∙Convert HDMI to Fiber Optic or Category Cable infrastructure

∙Dolby Atmos, DTS-X and 8+ Channel downmixing to 2 Channel

∙USB/KVM Host Support

∙4K60 4:4:4 at 18Gbps Audio/Video Signaling

∙HDMI 2.0 & HDCP 2.3

Please note - V1 and V2 MXNet systems are built on different IC hardware and as such cannot transmit and receive signals to each other - if you have a V1 system and require additional encoders and decoders be sure to order V1 hardware from our website - if you are unsure contact our pre-sales team via chat or telephone.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Tracing the footprints of AVPro Edge’s AC-MXNET-1G-EV2 and continuing down the evolutionary path of

the MXNet Platform, the AC-MXNET-1G-AVDM-EV2 draws upon an onboard proprietary audio decoder

module designed to extract two-channel, balanced analog audio from high bitrate, multi-channel audio

codecs including Dolby Atmos and DTS:X IMAX Enhanced for integration with multi-zone stereo

distribution systems. Downmixed signals are extracted and output in analog stereo via a balanced

Phoenix-type terminal on the encoder chassis.

The AC-MXNET-1G-AVDM-EV2 functions otherwise as an Evolution II Encoding / Transmitting device,

incorporating a newly designed AVPro Edge application-specific integrated circuit (ASIC) that introduces

an improved software-based video encoding / decoding engine into the IC for enhanced video

processing. Refinements to the IC include native support for 4K/60fps 4:4:4 signals (RGB and YCbCr @10-

and 12-bit). All MXNet first-generation encoder features are retained for use with the AC-MXNET-1G-

AVDM-EV2.

As a member of the AVPro Edge family of AV over IP products, an AC-MXNET-1G-AVDM-EV2 is the gateway where a signal enters the MXNet Ecosystem, connected with category cable (AVPro Edge

strongly encourages CAT-6a infrastructure for all MXNet system deployments however for MXNet 1G,

Cat-5e will comfortably transport MXNet 1G data signals) or fiber optic cabling, to an MXNet switch or

any compatible multicast-capable managed L3 network switch.

A connected HDMI source will have audio and video signals encoded into a multicast data format for

routing to any AC-MXNET-1D-EV2 system endpoint connected to the same MXNet switch. Encoded HDMI

source signals up to native 4K/60fps 4:4:4 with Dolby Vision, HDR10, HDR10+ and HLG are passed to EVO

II downstream AC-MXNET-1G-DV2 decoders, with

RS-232 serial pass-through, IR control or USB signals also transportable inside encoded data packets.

Encoding is executed using an optimized JPEG 2000 codec, which parses data at managed flexible rates

to minimize bitrate errors (200Mbps for 1080p content, 300Mbps for 4K/30fps content, peaking at

850Mbps for 4K/60fps content). Frame-syncing Genlock is supported, with latency near-zero and visually

imperceptible. The AC-MXNET-1G-AVDM-EV2 runs quietly and remains cool during operation, utilizing a

fan-less design featuring chip-top heatsinking to efficiently disperse heat while limiting power

consumption at typically 7 watts or less for stability and device longevity.

Key Benefits of Using AC-MXNET-1G-AVDM-EV2

Downmixing – Supports transmission of high bitrate multi-channel audio codecs through an MXNet

system while allowing simultaneous extraction and division of digital and analog audio signals. Standard

Dolby Audio & DTS-HD formats up to 7.1 may be downmixed and output as balanced analog stereo

audio. Dolby Atmos 7.1 base channels and DTS:X IMAX Enhanced audio soundtracks may also be

decoded then downmixed into analog stereo output for distribution through non-surround products.

JPEG 2000 – JPEG 2000 encoding implemented by MXNet differs from MPEG and other discrete cosine

transform-based codecs, as it optimizes compression efficiency for applications with limited bandwidth.

JPEG 2000 is based on a wavelet transform algorithm, providing lossless or lossy compression and

parseable code streams. Genlock is supported, syncing a video source by frame to Decoders comprising a

video wall, for a simul-sync, tear-free appearance.

JPEG 2000 is reliably used by Digital Cinema Initiatives for theatrical content, by television networks for

HD broadcasting, and by DICOM® for critical, decision-making, medical imaging applications.

Native 4K/60fps Support – First-generation MXNet Encoders and Decoders were unable to support

4K/60fps 4:4:4 RGB or YCbCr, 10- and 12-bit natively or with dynamic metadata.

When not lossless, the advanced encoding / decoding engine resident on the new ASIC developed for

EVO II Encoders and Decoders applies a limited, ultra-light compression, composing an artifact free

image upon decoding, including Dolby Vision or HDR10+ content.

Improved Preview Thumbnails - First generation MXNet supported static thumbnails with 960X540 pixel

resolution, turning over every 10 seconds. EVO II supports third-party media sub-streaming through an

HTTP address, at an improved pixel resolution of 1024x576.

Data Status Window – A forward-facing, built-in mini OLED screen displays information critical to device

set up, system troubleshooting, or standard operational status. Custom name an EVO II AC-MXNET-1G-

AVDM-EV2 with up to twelve allotted character slots for easy identification or to match your system

requirements. IP and MAC addresses are also displayed.

Control Signal Routing – IR and RS-232 control signal routes that have been mapped with MXNet Mentor

software direct commands to downstream EVO II decoders through the AC-MXNET-1G-AVDM -V2. Any

EVO II decoder connected to an MXNet system switch may be eligible to receive routed signals. I-PASS

and IR-EYE ports support IR signal throughput from third-party over-control systems to endpoint-related

products.

USB and KVM Support – A USB 2.0 Type-B female Host connection resides on every AC-MXNET-AVDM-

1G-EV2. MXNet Mentor software enables easy routing configuration for bi-directional USB signals from a

designated Host Encoder to a downstream decoder with a connected USB device.

External Device Light Control – Light emission from an AC-MXNET-1G-AVDM-EV2 may be controlled via

MXNet Mentor. Any status light, including network link LEDs and the OLED Data Window may be

optionally disabled to prevent unwanted distraction, enabling discreet placement where desired. Device

lights may also be continuously “flashed” for high visibility when troubleshooting.

Specifications

Video Input / Ingestion:
Signal Type	DVI 1.0, HDMI 2.0b
Video Resolution	720P@50/60Hz; 1080P@50/60Hz; 4K@50/60HZ 4:4:4*; 4K@30HZ 4:4:4; 4K@60HZ 4:2:0; 4K@24HZ 4:2:0/4:2:2 [Ultrawide Support]
HDR Format	HDR 10, HLG, Dolby Vision @30Hz
Chroma Subsampling	4:4:4, 4:2:2, 4:2:0
Bit Depth per Color	1080P (16Bit), 4k (10, 12 Bit)
Visually Lossless	4096x2160P@60Hz (8 BIT) 4:4:4 or RGB; 3840x2160P@60HZ (12BIT) 4:2:2 DOLBY VISION; 3840x 2160P@60HZ (10BIT) 4:2:2 HDR10/HLG; 1920x1080P@60HZ (12BIT)
Audio:
Audio Format (end to end)	PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution, DTS-HD Master Audio, Dolby Atmos
Audio Format (HDMI Loopout)	Same as End to End
Embedded Audio	Stereo Analog Audio
De-Embedded Audio	Stereo Analog Audio
Ports:
Ethernet	(1) × female RJ-45, PoE
SFP	(1) × SFP Slot
HDMI	(2) × HDMI Type A 19-pin, female, one HDMI input, one HDMI loop out
Audio	(1) × 5 Pin Terminal Block, Balanced L/R Audio out (1) × 3.5 mm mini stereo jack, Audio in
IR	(3) × 3.5mm mini-stereo jack, one IR-Pass, one IR-EYE, one IR-out
RS232	(1) × 5 Pin Terminal Block
USB	(1) × USB 2.0 Type-B for USB extension and KVM, (1) × USB Micro Type-B for MXNet service
Distance:
Ethernet	100 Meters/ 330 Feet over CAT5e and above
SFP and Fiber	1000BASE-SX SFP Transceiver Module (MMF, 850nm, 550m, LC, DOM) 1000BASE-LX/LH SFP 1310nm 10km Transceiver Module
Environmental:
Operating Temperature	23 to 125°F (-5 to 51°C)
Storage Temperature	-4 to 140°F (-20 to 60°C)
Operating Humidity	5-90% RH (No Condensation)
Power:
Max Power Consumption	6.5W (AVDM 9.5W)
PoE (Power over Ethernet)	IEEE 802.3af (15.4W)
Power Supply Unit	Input: AC 120-240V-50/60Hz 0.8A Output: DC 12V 2A
Dimensions:
Mounting	Rack and Furniture mount support
Dimensions (Unit Only Width/Depth/Height)	mm: 200 X 120 x 20 inch: 7.87 X 4.74 X 0.79
Dimensions (Packaged Width/Depth/Height)	mm: 310 X 180 x 54 inch: 12.2 X 7.09 X 2.13
Weight (Unit)	1.5 LBS/0.8 KG
Weight (Packaged)	2 LBS/0.91 KG
Regulatory	CE/FCC/UL
Product Warranty	10 Years
Specifications subject to change without notice. Mass & dimensions are approximate *4K60 4:4:4/4k60 4:2:2 Uses ICT Compression