AC-MXNET-1G-EWPV1 MXNet 1G Wall Plate Encoder Device

Clean, sleek and stable, that is what you get when you install this AV over IP encoder device that fits into any standard dual gang mud ring. Connect this MXNet wall plate to any HDMI source, and it will encode the audio/video signal into a multicast data format that can be routed to any Decoder endpoint within the project/installation. This device connects directly via category cable (CAT 6A recommended) to the any of the MXNet Switches. The AC-MXNET-EWP is a part of the MXNet family of AV-over-IP products from AVPro Edge.

• 1G Maximum Data Rate
• Bandwidth management via MXNet MENTOR
• Uses any standard category cable (CAT 5E or better)
• Wall Plate Format that fits in standard Dual Gang mud rings
• USB/KVM Host support
• Full Exterior Light Control (for discreet Installs)

The AC-MXNET-EWP will encode a full 4K 4:4:4 60Hz HDMI video signal – along with audio, control, power, and HDR metadata. These signals are passed to single or multiple Decoder endpoints via multicast routing through an MXNet or multicast compatible L3 managed network switch.  It does all this with next to zero latency. MXNet Encoders encode audio/video/control signals into IP packets using an optimized JPEG2000 codec at a flexible data rate (200Mbps for 1080p content, 300Mbps for 4K30 content, 850Mbps at peak).

The AC-MXNET-EWP is designed to sleekly be mounted into walls, tables, desks or any other remote place you want to have an HDMI input to your video distribution system. With VGA and HDMI video inputs, plus the ability to bi-directionally pass USB signals this is the ideal solutions for large scale offices, educational centers, hospitality or house of worship.

Key Benefits:

JPEG 2000 – JPEG 2000 is the obvious and essential video encoding choice when picture quality is critical.  JPEG 2000 supports progressive decoding and delivers both lossy and lossless compression within a code stream. JPEG 2000 supports GEN LOCK so that the frames of a video source are synced to all Decoders resulting in tear-free video walls. JPEG 2000 enables the handling of color-space information, 10bit color, and it supports interactivity in networked applications.

Dual Gang Wall Plate – This standard size allows you to place this unit so when installed looks ultra-sleek but still carries all the capabilities of the other MXNet encoder units. This sleek look is perfect for professional environments where the finished look of the installation counts!

Full External Light Control - Our integrators pride themselves on their work, so don’t let a small blue, green, red, or yellow light ruin your perfectly engineered viewing room. When you install an Encoder in a discreet location, you have the option to turn off ALL the lights on the device - including network link lights - as well as the Data Window OLED light. This allows you to install the Encoder, and once you know everything is working, eliminate any light outputted from the device.  This way, the end-user will never even know it’s there.

USB and KVM Support - Each Encoder unit has a USB-B Host connection. This allows you to connect and route any connected USB signals to a Decoder device. Use the MXNet MENTOR software to specify the Host Encoder and the upstream USB device connected to the selected Decoder.