Akuvox E12W IP Intercom with 1 Button, Camera, BLE, RFID, PoE & WiFi

E12 Specification

• Physical & Power

  Body Material: Plastic

  Camera: 2M pixels, automatic lighting

  Button: 1 call button with backlight

  Wiegand port: Support

  RF card reader: 13.56MHz

  Light sensor: 1

  Relays out: 1

  Inputs: 2

  Micro SD card slot: 1

  Microphone: -36dB

  Speaker: 8Ω / 1.5W

  Ethernet port: RJ45, 10/100Mbps adaptive

  BLE: Yes

  WiFi: IEEE802.11b/g/n, 2.4GHz (E12W Only）

  Vandal alarm: Yes

  802.3af Power-over-Ethernet

  12V DC connector (if not using PoE)

  Power: 12V / 1A

  Water-proof & Dust-proof: IP65

  Installation: Wall-mounted

  Size: 146x70x23mm

  Working Humidity: 10~90%

  Working Temperature: -40°C ~ +60°C

  Storage Temperature: -40°C ~ +70°C

• Audio

  SIP v1 (RFC2543), SIP v2 (RFC3261)

  Narrowband audio codec: G.711a, G.711μ, G.729

  Broadband audio codec: G.722

  DTMF: In-band, out-of-band DTMF (RFC2833), SIP Info

  Echo Cancellation

  Voice Activation Detection

  Comfort Noise Generator

• Video

  Sensor: 1/2.7”, CMOS

  Pixels: CIF, QCIF, VGA, 4CIF, 720p, 1080p

  Video codec: H.264, H.265

  Video resolution: up to 1920x1080p

  Max. image transfer rate: 1080p – 25fps

  Viewing angle: 123°(H) / 69°(V)

  White LEDs for picture lighting during dark hours with internal light sensor

• Door Entry Feature

  Relays controlled individually by DTMF tones

  Camera permanently operational

  Auto-night mode with LED illumination

  White balance: auto

  Minimum illumination: 0.1LUX

• Networking & Protocol

  Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP

• Deployment & Maintenance

  Auto-Provisioning

  Web management portal

  Configuration backup / restore

  Entry log export

  Access table export / import

  Firmware upgrade

  System logs (include door access logs)

• Application Scenario

  Apartment/flat intercom with door access control

  Remote site entry over Internet