AudioControl ACP-CMD-2750 CM2-750D with Dante 2-Channel Dual-Mode 70V DSP Amplifier with Dante

Registered trade customers only can see price

SKU# :

ACP-CMD-2750

SKU

ACP-CMD-2750

2-Channel High Power Dual-Mode 70V DSP Amplifier with Dante

Dante audio distribution
3 outputs, 750 W per zone
Switchable 70 V/100 V into 8 ohm/4 ohm outputs
Matrixable inputs
Powerful web interface with DSP Control

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

AudioControl 70-volt amplifiers are designed to deliver high power with superior audio quality to a large number of loudspeakers. Ideal for outdoor audio systems or commercial A/V installations, DSP control and signal matrixing capabilities from AudioControl’s award-winning Director Series amplifiers enable integrators to precisely tailor the sound to any listening environment. Choose from balanced/unbalanced analog, microphone, or digital inputs. Outputs can be configured in mono or stereo, giving integrators the configuration flexibility they need to accommodate any system architecture. System setup and diagnostics can be managed remotely via an IP web interface for maximum efficiency.

DANTE SUPPORT

Dante audio networking uses standard IP networks to transmit high-quality, uncompressed audio with near-zero latency. Dante is the audio networking choice of nearly all professional audio manufacturers.

Specifications

INPUTS Inputs: 8 Balanced Inputs, 8 Unbalanced RCA Inputs, 2 Digital Coaxial/TOSLINK Inputs Input Sensitivity: 1 Vrms for full output, level at maximum Input Gain: 30 dB	CONTROL Remote Power Trigger: +12 VDC or Dry Contact Closure Network Connection/Protocol: 10Base-T Ethernet TCP/IP Communication Protocol: HTTP or Telnet
OUTPUTS Amplifier Channels: 2 Power Output (70 V/100 V): 750 W per channel Power Output (70 V/100 V Bridged): 1500 W Power Output (8 Ω/4 Ω): 625 W per channel Power Output (8 Ω Bridged): 1250 W Minimum Speaker Load: 2 Ω Preamp Audio Outputs: 4 Balanced, 4 Unbalanced RCA, 4 Digital Coax Loop Outputs	WEIGHT & DIMENSIONS Dimensions: 17” W x 15.5” D x 3.5” H (2 U) Weight: 18.5 lbs. (8.4 kg)
	IN THE BOX Model CM4-750, Speaker Connectors, Remote Connector, Power Cord, Manual, Warranty

Features

Network DSP Matrix Amplifier With Volume Control Dante port
2 Channels x 750 Watts at 70/100 V or 2 Ω/4 Ω (All Channels Driven)
2 Channels x 625 Watts at 8 Ω (All Channels Driven)
1500 Watts of Bridged Power at 70/100 V or 4 Ω/8 Ω
Digital Signal Processing (DSP) Performance
Downloadable Speaker Optimization Profiles
Ethernet Port for Status Monitoring, Source Switching, and 12 Volt Trigger Control
Built-in Matrix Delivers Analog or Digital Inputs for Routing To Any Zone or
Digital Bus Output
Network Programmable Graphic & Parametric Equalization with User Memories
Assignable Names for All Zones & Amplifier
Digital Signal Sense
Programmable Electronic Crossover for Local Subwoofer Applications; Subsonic Filter
AudioControl LightDrive™ Anti-Clipping Speaker Protection
Digital Coaxial/TOSLINK signal sensing inputs
Balanced Analog Euro-block Inputs
Single-ended RCA Inputs with Loop Outputs
Dual Coaxial Digital Bus Outputs
Commercial and Home Installations

SKU	ACP-CMD-2750
Warranty	5 Years
Watts per Channel (2ohm)	750W
Watts per Channel (4ohm)	750W
Watts per Channel (8ohm)	625W
70/100v Output	Yes