AudioControl ACP-RS-500 RS-500 500W Subwoofer Amplifier

Registered trade customers only can see price

SKU# :

ACP-RS-500

SKU

ACP-RS-500

500W Subwoofer Amplifier with DSP

500 Watts at 8/4 Ohms, stable into 2 ohms
Powerful Web interface with DSP Control
Downloadable Speaker Optimization Profiles
Programmable Graphic & Parametric Equalization

Rack Mounts Included

Skip to the end of the images gallery

Skip to the beginning of the images gallery

AudioControl ACP-RS-500 RS-500 500W Subwoofer Amplifier

Details

The AudioControl RS 500 DSP-controlled subwoofer amplifier is the ultimate bass amplification solution for any home cinema, multi-zone audio, or 2.1-channel music system.

RS Series amplifiers deliver continuous power into speaker loads from 2 to 8 ohms, and like many AudioControl amplifiers, the RS series offers IP or IR control, plus looped outputs with an optional high-pass filter.

The power of AudioControl’s multi-award-winning DSP engine, coupled with features such as graphic equalization, parametric equalization, high/low filter cutoff, and incremental signal phase with delay compensation, put precise calibration and fine-tuning control at your fingertips for accurate, authoritative bass response. RS Series amplifiers are the definitive choice to power passive subwoofers in entertainment systems that demand the very best.

Specifications

INPUTS Audio Inputs: 1 Balanced, 2 Unbalanced, 1 LFE, 2 Speaker-Level Nominal sensitivity: 0.5V to 4V (user selectable) Signal to Noise (A-wtd ref full output): 98 dB Frequency Response: 15 Hz – 350 Hz	CONTROL Remote Power Trigger: +12 VDC or Dry Contact Closure Network Connection/Protocol: 10BaseT Ethernet TCP/IP Communication Protocol: HTTP or Telnet 12 Volt Trigger Outputs: 1 IR Receiver Inputs: 1
OUTPUTS Amplifier Channels: 1 Continuous power output: 500W Minimum Speaker Load: 2Ω Loop/Thru Audio Outputs: 1 Balanced, 2 Unbalanced, 1 LFE Total Harmonic Distortion: 0.1%	WEIGHT & DIMENSIONS Dimensions (including terminals and feet): 17” W x 17.5” D x 1.75” H (1 U) Weight: 14.9 lbs. (6.8 kg)
	IN THE BOX RS 500, power cord, rack mounting brackets, user manual, warranty

Features

500 Watts into 8, 4, or 2 Ohms
Digital Signal Processing (DSP) Performance
Six-band Graphic EQ
Eight-band Parametric EQ
Variable Crossover with protective Subsonic Filter
Downloadable Speaker Optimization Profiles
Ethernet Port for Status Monitoring, Source Switching, and 12 Volt Trigger Control
Network Programmable Graphic & Parametric Equalization with User Memories
Digital Signal Sense
AudioControl LightDrive Anti-Clipping Speaker Protection
Balanced Input/Thru Output
Unbalanced Inputs/Thru Output
LFE Input/Thru Output
Speaker-Level Inputs
12 Volt Triggerable
5-Way Binding Posts
Perfect for Home and Commercial Installations

SKU	ACP-RS-500
Warranty	5 Years
Watts per Channel (2ohm)	500W
Watts per Channel (4ohm)	500W
Watts per Channel (8ohm)	500W
70/100v Output	No