AudioControl ACP-DMZ-M6800D Director M6800D 16-Channel DSP Matrix Amplifier with Dante

Registered trade customers only can see price

SKU# :

ACP-DMZ-M6800D

SKU

ACP-DMZ-M6800D

16-Channel High Power DSP Matrix Amplifier with Dante

16 channels, up to 8 Zones
100W into 8 Ohms, 200W into 4 Ohms
Dante audio distribution
Built-in Matrix Delivering Analog or Digital audio to any zone

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

AudioControl Director® M Series amplifiers are among the highest-powered, most flexible multi-zone amplifiers worldwide, designed exclusively for commercial and residential custom integrators. In the most demanding applications for all system amplification and IP programmable signal processing tasks, the Director® M Series Model M6800D has the power and flexibility to operate as a standalone DSP amplifier or partnered with 3rd party over-control systems from companies such as Control4, Crestron, RTI and Savant. Configure graphic and parametric equalization, crossover points, volume settings, zone grouping, network monitoring, and more using the onboard DSP.

The Director® M Series Model M6800D adds Dante input/output matrixing and system integration with additional M6800D and AudioControl CM series amplifiers. Using the Dante Controller, physical M6800D inputs become virtual sources that are available to other Dante devices with input/amplification capabilities. Dante Controller may be used to route Dante sources from any device, making them accessible from the input selection menu and/or an automation system.

16, 100-watt channels into 8 Ohms become 200 watts per channel with 4-Ohm loudspeaker loads. When two channels bridge outputs, that single channel produces 400 watts into 8 Ohms, more than enough power for even the most demanding loudspeaker configurations. Two digital input busses selectable between Coaxial and TOSLINK with Coaxial outputs may be matrixed, along with every analog zone input to any zone or all zone outputs. Built-in speaker profiles from AudioControl’s Sound Partners™ program members offer M Series DSP-optimized tonally balanced speaker calibrations from a growing list of prominent loudspeaker manufacturers.

Discover for yourself the countless critical ways in which AudioControl Director® M Series amplifiers, designed, engineered, and manufactured in Seattle, USA, contribute to successful commercial or residential systems.

DANTE SUPPORT

Dante audio networking uses standard IP networks to transmit high-quality, uncompressed audio with near-zero latency. Dante is the audio networking choice of nearly all professional audio manufacturers.

Specifications

INPUTS Inputs: 8 Stereo Local Inputs, 2 Coaxial/TOSLINK Bus Inputs Input Sensitivity: 1 Vrms for full output, level at maximum Input Gain: 30 dB	CONTROL Remote Power Trigger: +12 VDC or Dry Contact Closure Network Connection/Protocol: 10Base-T Ethernet TCP/IP Communication Protocol: HTTP or Telnet
OUTPUTS Amplifier Channels: 16 Power Output (8 Ω): 100 W per channel Power Output (4 Ω): 200 W per channel Power Output (8 Ω Bridged Mono): 400 W Minimum Speaker Load: 4 Ω Preamp Audio Outputs: 8 Stereo Loop Outputs, 2 Coaxial Digital S/PDIF Outputs	WEIGHT & DIMENSIONS Dimensions: 17” W x 15.5” D x 3.5” H (2 U) Weight: 21.0 lbs. (9.5 kg)
PERFORMANCE Crosstalk: > 80 dB @ 1 kHz Damping Factor: >300 Signal to Noise: >95 dB, A-wtd, ref full output Crosstalk: >80 dB @ 1 kHz DAC Specifications: 32 to 96 kHz sample rate, 16-/24-bit depth	IN THE BOX The Director Model M6800D, Speaker Connectors, Remote Connector, Power Cord, Manual, Warranty

Features

Support for Dante audio
Network DSP Amplifier With Volume Control
16 Channels x 100 Watts into 8 Ohms (All Channels Driven)
16 Channels x 200 Watts into 4 Ohms (All Channels Driven)
8 Bridgeable Channels of 400 Watts into 8 Ohms
Built-In Speaker Optimization Profiles
Ethernet Port for Status Monitoring, Source Switching, and 12 Volt Trigger Control
Network Programmable Graphic & Parametric Equalization with User Memories
Assignable Names for Amplifiers & All Zones
Digital Signal Sense
Master 12 VDC In/Out Trigger
Programmable Electronic Crossover for Local Subwoofer Applications; Subsonic Filter
AudioControl LightDrive™ Anti-Clipping Speaker Protection
Local Inputs with Pass Through/Loop Outputs
Dual Analog Bus Inputs
Compact 2 U Rack Space (Includes Rack Mount Brackets)
Commercial or Residential Installation Compatible

SKU	ACP-DMZ-M6800D
Warranty	5 Years
Watts per Channel (4ohm)	200W
Watts per Channel (8ohm)	100W
70/100v Output	No