Axion 5 Channel DMX Decoder V2

Details

5 Channel Constant Voltage DMX512 & RDM LED Decoder with numeric display, seven PWM frequency selection, linear or logarithmic dimming and multiple protections.

Specifications

Input Voltage: 12 – 48 volts DC
Input Current: 20.5A
Output Voltage: 5 x (12 – 48) VDC
Output Current: 5 channel, 4 amps per channel max
Output Type: Constant voltage
Operating Temperature: -30C – +55C
IP Rating: IP20
EMC Standards: ETSI EN 301 489-1 V2.2.3 and ETSI EN 301 489-17 V3.2.4
Safety Standards: EN 62368-1:2020+A11:2020
Certifications: CE, EMC, LVD

Features

Features

Fully compliant with the DMX512 standard protocol.
No DIP switches! Use the integrated buttons and digital display to configure the DMX address.
Supports RDM functionality for those DMX masters or controllers that take advantage of this enhanced protocol.
16 bit (65536 levels) or standard 8 bit (256) level selection.
PWM dimming frequency selection: 250 / 500 / 1000 / 2000 / 4000 / 8000 / 16000 Hz options for reduced power noise and LED flickering.
Logarithmic or linear dimming curve selectable.
Over-heat, over-load and short circuit protection with automatic recovery.
- OLA will display when overload alarm present.
- OHA will display if overheating.
Automatic DMX signal detection helps to know if there are line issues.
Default Output Level setting allows you to set the light level if the DMX signal is lost.
6 modes of independent self-testing built-in.
CE, EMC, and LVD certified.
5 year warranty