BB-RS232 BlueBOLT Ethernet To D9 RS232 Adaptor

Registered trade customers only can see price

SKU# :

BB-RS232

SKU

BB-RS232

The BB-RS232 Adaptor provides Ethernet connectivity to BlueBOLT-supported Furman Sequencing products CN-1800S, CN-2400S, CN-3600SE that are otherwise only capable of RS-232 communication.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Furman BB-RS232

The BB-RS232 Adaptor provides Ethernet connectivity to BlueBOLT-supported Furman Sequencing products CN-1800S, CN-2400S, CN-3600SE that are otherwise only capable of RS-232 communication. Once the adaptor is connected between the BlueBOLT supported product (via RS-232) and the site’s Local Area Network (via Ethernet), the product can communicate with our BlueBOLT servers.

BlueBOLT allows you to:

Control individual outlets or outlet banks.
Monitor your devices and power status.
Receive email alerts for power events.
Schedule tasks such as power on, off, cycling, and sequencing.
Manage multiple devices in your chain of devices.
Utilize device-specific features for your compatible product.

Specifications

BB-RS232 Specifications

General

Line Voltage 120 (Volts)
BlueBOLT Enabled Yes

Shipping Info

Length 8.1 (Inches)
Width 6.4 (Inches)
Height 3.8 (Inches)
Weight 1.65 (Lbs)
Unit of Measure Each
UPC 050616008891
Master Pack Qty 24

Other Specifications

Networking 10/100Base-T Ethernet, RJ-45 Jack.
RS-232 Port DSUB 9 Male connector. Pins 2 (RXD), 3 (TXD) and 5 (COM) are used for communication, pins 1 (GND) and 9 (+12V) are used for power.
Ethernet Port 100BaseT Ethernet Communication with BlueBOLT service on the Local Area Network.
Power Powered through non-communication signal wires of supplied 9-conductor cable (for RS232 port) or with included wide-range AC/DC switched-mode wall adaptor.
Dimensions 1’ H x 2.5’ W x 4’ D

Features

BB-RS232 Features at a Glance

COMMUNICATION PORTS

RS-232 with DSUB 9 Male connector. Pins 2 (RXD), 3 (TXD) and 5 (COM) are used for communication, pins 1 (GND) and 9 (+12V) are used for power.

100BaseT Ethernet Communication with BlueBOLT service or a control system on the Local Area Network.

INDICATORS

For BlueBOLT connected, Status, Ethernet Link Status, and Data Activity.

RESET BUTTON

Short press of Reset causes adaptor to reset the device. Holding down Reset for >10 seconds causes adaptor to revert to its default setting.

POWER

Powered through non-communication signal wires of supplied 9-conductor cable (for RS232 port) or with included wide-range AC/DC switched-mode wall adaptor.

MOUNTING

Capable of being mounted to the rear equipment rack rail via its flange holes and supplied rack screws or on side of the equipment rack via the flange holes and zip-ties (not supplied).

Product Attachments Downloads

More Information
SKU	BB-RS232
Warranty	Three Year Limited Warranty