2N
3CX
AVLinkPro
AVProEdge
Akuvox
Aldous Home Networks
Araknis Networks
Aten
AudioControl
Axion Lighting
Binary
BulletTrain
CasaTunes
Cerasonar
ClareVision
Cleerline
Coolautomation
ELAN
Episode
FrenchFlair Audio
Frenetik Audio
Furman
Fusion Research
Kordz
Leviton
Luma
MSolutions
Murideo
NVT Phybridge
Nice
Penn Elcom
Platinum Tools
Proficient
Pulse Eight
Rako
SpeakerCraft
Spectre Acoustics
Strong
Sunfire
Triax
Visualint
WattBox
Wirepath
Xantech
Yealink
eelectron
SKU# :
EL-IPD-AMP-EXT
SKU
EL-IPD-AMP-EXT
The EL-IPD-AMP-EXT Multi Zone Audio Extender complements the ELAN IP amplifier and preamps to add up to 12 zones of audio over existing networks using Dante.
Skip to the end of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Skip to the beginning of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
ELAN EL-IPD-AMP-EXT
The EL-IPD-AMP-EXT is used in conjunction with an amplifier or preamp in the ELAN family of IP enabled amps to add up to 8 zones of audio. Configure speaker outputs as left, right, or mono with single or multiple speakers connected to each. Four line level audio outputs can be configured as left, right, mono, or subwoofer out. Each output or combination of outputs can be configured as separate zones with EQ and lip sync delay applied to any zone individually. ELAN IP enabled audio distribution simplifies whole house audio distribution and enhances the intelligent home by delivering high quality audio over the existing network. Easily scaling from a single chassis solution to a decentralized multi-chassis / multi-source implementation, ELAN IP audio distribution meets the needs for projects of up to 64 individual zones.
EL-IPD-AMP-EXT Specifications
- Shipping Info
-
- Length22.4 (Inches)
- Width20.7 (Inches)
- Height9.5 (Inches)
- Weight28.85 (Lbs)
- Unit of MeasureEach
- Other Specifications
-
- Line Level Audio Outputs2 Stereo / 4 Mono Analog RCA Pre-amp Outputs
- Configurable to Left, Right, Mono, or Sub-woofer
- Fixed or variable line level output
- Fixed: 0dB nominal gain
- Variable: -50 to +0dB at 0.5dB per step
- Unbalanced
- Output impedance: 470 Ω
- Amplifier Output4 Stereo / 8 Mono Amplifier Outputs
- Configurable to Left, Right, or Mono
- Output Power: 80W at 8Ω
- 100W at 4Ω
- THD: < 0.05% @ 1kHz
- Frequency Response: 20Hz to 20kHz, +.5dB/-.5dB
- Crosstalk: >60dB @ 1kHz/1W
- Signal to Noise: >100dB
- Lip Sync DelayIndividual Lip Sync Delay for Each Speaker and Preamp Zone
- Delay Time: 0 - 400ms
- Adjustable: 10ms increments
- Tone ControlIndividual Tone Control for Each Speaker and Preamp Zone
- Five-band equalizer
- Loudness on/off
- High/Low pass
- Adjustable Crossover Points
- Trigger Outputs3.5mm Mono
- Zone Trigger / System Trigger Outputs
- Pinout: Tip = signal, Sleeve = ground
- Output: +12Vdc, 100mA current limit
- Network1 RJ45 Jack 100/1000 Ethernet DHCP Enabled by Default
- PowerAC 100-120 / 220-240 V~ 50/60Hz, 1000W
- TemperatureOperating Temperature: +5° C – +45° C (+41°F - +113°F)
- Operating Humidity: 0 – 90% non-condensing
- Storage Temperature: 0° C – +60° C (32°F - +140°F)
- Dimensions17D X 17W X 4H in. / 431.8D X 431.8W X 101.6H mm (with feet)
- 17D X 17W X 3.5 in. / 431.8D X 431.8W X 88.9H mm (without feet)
- Weight21.35 lbs / 9.68 Kg
EL-IPD-AMP-EXT Features at a Glance
- 4 Stereo or 8 Mono Ampli?ed Zones and 2 Stereo or 4 Mono Pre-amp Zones
- 80WPC at 8Ω, 100WPC at 4Ω
- DSP with 5-Band EQ for Each Zone
- Lip Sync Correction
- Dante Audio Networking
SKU | EL-IPD-AMP-EXT |
---|---|
Warranty | 2 Years |
Write Your Own Review
More from ELAN