2N
3CX
AVLinkPro
AVProEdge
Akuvox
Aldous Home Networks
Araknis Networks
Aten
AudioControl
Axion Lighting
Binary
BulletTrain
CasaTunes
Cerasonar
ClareVision
Cleerline
Coolautomation
ELAN
Episode
FrenchFlair Audio
Frenetik Audio
Furman
Fusion Research
Kordz
Leviton
Luma
MSolutions
Murideo
NVT Phybridge
Nice
Penn Elcom
Platinum Tools
Proficient
Pulse Eight
Rako
SpeakerCraft
Spectre Acoustics
Strong
Sunfire
Triax
Visualint
WattBox
Wirepath
Xantech
Yealink
eelectron
SKU# :
EL-IPD-MTX-8CH
SKU
EL-IPD-MTX-8CH
The EL-IPD-MTX-8CH Multi Zone Audio Matrix can be used in a stand-alone configuration or with other amplifiers and pre-amps within the ELAN IP audio distribution family of products by adding the optional Danteâ„¢ Audio Networking Card.
Skip to the end of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Skip to the beginning of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
ELAN EL-IPD-MTX-8CH
Important Note:Â EL-IPD-MTX-8CH replaces the S86A. Reach out to your RSM for any questions.
The EL-IPD-8CH-MTX can be used in stand alone mode to support up to 13 input sources (4 digital, 8 mono / 4 stereo analog RCA and 1 stereo 3.5mm typically used as the doorbell input from an ELAN System Controller). Each RCA analog input can be configured with another as a L/R pair or individually as mono. 8 speaker channels are available (up to 4 stereo zones or 8 mono zones). 4 line level outputs can be configured as up to 4 mono or 2 stereo output zones or as sub-woofer out. Each can be configured as left, right, mono, or sub out. Adding the optional Danteâ„¢ Audio Networking card connects sources to and from other Danteâ„¢ enabled ELAN IP amplifiers using existing networks. ELAN IP enabled audio distribution simplifies whole home audio distribution and enhances the intelligent home by delivering high quality audio over the existing network. Easily scaling from a single chassis solution to a decentralized multi-chassis / multi-source implementation, ELAN IP audio distribution meets the needs for projects of up to 64 individual zones.
The EL-IPD-8CH-MTX can be used in stand alone mode to support up to 13 input sources (4 digital, 8 mono / 4 stereo analog RCA and 1 stereo 3.5mm typically used as the doorbell input from an ELAN System Controller). Each RCA analog input can be configured with another as a L/R pair or individually as mono. 8 speaker channels are available (up to 4 stereo zones or 8 mono zones). 4 line level outputs can be configured as up to 4 mono or 2 stereo output zones or as sub-woofer out. Each can be configured as left, right, mono, or sub out. Adding the optional Danteâ„¢ Audio Networking card connects sources to and from other Danteâ„¢ enabled ELAN IP amplifiers using existing networks. ELAN IP enabled audio distribution simplifies whole home audio distribution and enhances the intelligent home by delivering high quality audio over the existing network. Easily scaling from a single chassis solution to a decentralized multi-chassis / multi-source implementation, ELAN IP audio distribution meets the needs for projects of up to 64 individual zones.
EL-IPD-MTX-8CH Specifications
- Shipping Info
-
- Length22.3 (Inches)
- Width20.7 (Inches)
- Height9.6 (Inches)
- Weight30 (Lbs)
- Unit of MeasureEach
- Other Specifications
-
- Digital Audio Inputs2 Optical TOSLINK Inputs
- 2 Coaxial RCA Inputs
- Stereo, PCM, 96kHz, 24-bit
- Line Level Audio Inputs4 Stereo / 8 Mono Analog RCA Inputs
- Configurable to Left, Right, or Mono
- Max input level 2.0 VRMS
- Input Sensitivity: 0dbV (1.0 VRMS)
- Input Impedance: 47kΩ-49k Ω
- Doorbell Audio Input3.5mm Stereo Input
- Maximum input level: 2.0 VRMS
- Input sensitivity: 0dbV (1.0 VRMS)
- Input impedance 47k Ω to 49k Ω
- Line Level Audio OutputsStereo / 4 Mono Analog RCA Pre-amp Outputs
- Configurable to Left, Right, Mono, or Sub-woofer
- Fixed or variable line level output Fixed: 0 dB nominal gain
- Variable: -50 to +0dB at 0.5dB per step Unbalanced
- Output impedance: 470 Ω
- Amplifier Output4 Stereo / 8 Mono Amplified Outputs
- Configurable to Left, Right, or Mono
- Output Power: 80W at 8Ω, 100W at 4Ω
- THD: < 0.05% @ 1kHz
- Frequency Response: 20Hz to 20kHz, +.5dB/-.5dB
- Crosstalk: >60dB @ 1kHz/1W
- Signal to Noise: >100dB
- Lip Sync DelayIndividual Lip Sync Delay for Each Speaker and Preamp Zone
- Delay Time: 0 - 400ms
- Adjustable: 10ms increments
- Tone ControlIndividual Tone Control for Each Speaker and Preamp Zone
- Five-band equalizer
- Loudness on/off
- High/Low pass
- Adjustable Crossover Points
- Trigger Outputs3.5mm Mono
- Zone Trigger / System Trigger Outputs
- Pinout: Tip = signal, Sleeve = ground
- Output: +12Vdc, 100mA current limit
- Network1 RJ45 Jack 100/1000 Ethernet DHCP Enabled by Default
- PowerAC 100-120 / 220-240 V~ 50/60Hz, 1000W
- TemperatureOperating Temperature: +5° C – +45° C (+41°F - +113°F)
- Operating Humidity: 0 – 90% non-condensing
- Storage Temperature: 0° C – +60° C (32°F - +140°F)
- Dimensions17D X 17W X 4H in. / 431.8D X 431.8W X 101.6H mm (with feet)
- 17D X 17W X 3.5 in. / 431.8D X 431.8W X 88.9H mm (without feet)
- Weight21.9 lbs / 9.93 Kg
EL-IPD-MTX-8CH Features at a Glance
- 4 Stereo or 8 Mono Amplified Zones and 2 Stereo or 4 Mono Pre-amp Zones
- Expandable with Additional Chassis and Optional Dante Network Audio Card
- 80WPC at 8Ω, 100WPC at 4Ω
- 2 Optical, 2 Co-ax, and 4 Stereo / 8 Mono Analog Inputs
- DSP with 5-Band EQ for Each Zone
- Lip Sync Correction
SKU | EL-IPD-MTX-8CH |
---|---|
Warranty | 2 Years |
Write Your Own Review
More from ELAN