AudioControl ACP-BLX-1K BLX-1K Balanced Line Transceiver
SKU# :
ACP-BLX-1K
SKU
ACP-BLX-1K
Balanced Line Transceiver
Skip to the end of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Skip to the beginning of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Professional A/V installers often encounter projects requiring long cable runs, and the BLX-1K has been engineered as a premium, simple solution to efficiently address these challenges. The BLX-1K is a signal extender that sends and receives a fully balanced, noise-rejecting, analog audio signal up to 1000 feet over standard CAT5e/6A cable.
Designed for use in pairs at both ends of the signal path, each BLX-1K contains a 2-channel receive stage as well as a 2-channel transmit stage, enabling audio to travel in both directions across a span of standard CAT5e/6A. Once wired connections are made, the A/B button on one unit is pressed to reverse the signal path. Signal gain can then be set to complete the installation. The BLX-1K comes equipped with a 24 VAC transformer for easy connection and ultra-quiet performance.
The BLX-1K delivers a stout output of nearly 8 Volts rms with an exceptionally low noise floor, providing a pure, crystal clear audio signal over long Ethernet runs—the ultimate problem-solver for A/V installers.
| Unbalanced Inputs (RCA): 2 Unbalanced Input Impedance: 100 kΩ Maximum Unbalanced Input Signal Level: 3.8 Vrms Balanced Inputs (CAT5e/6A): 1 (2 channel) Balanced Input Impedance: 200 kΩ |
GENERAL Power Supply: 24 VAC Current Draw: 50 mA |
| OUTPUTS Unbalanced Outputs (RCA): 2 Unbalanced Output Impedance: 150 Ω Maximum Unbalanced Output Signal Level: 7.5 Vrms max Balanced Outputs (CAT5e/6A): 1 (2 channel) Balanced Output Impedance: 150 Ω Maximum Balanced Output Signal Level: 15 Vrms max |
WEIGHT & DIMENSIONS Dimensions: 6.2” W x 4.3” D x 1.0” D Weight: 1.0 lbs. (0.5kg) |
| PERFORMANCE Frequency Response: 20 Hz to 20 kHz, ± 1 dB Signal to Noise: >100 dB (ref. full output = 7.5 Vrms) Total Harmonic Distortion: 0.1% Headroom: 8.5 dB Channel Separation: 90 dB (1 kHz) CMRR: >69.5 dB (1kHz) |
IN THE BOX BLX-1K, AC Adapter, Manual, Warranty |
- Send/receive high-quality audio up to 1000 feet
- High gain, low noise outputs
- Simple connection with one-button setup
- Supports standard CAT5e/6A cable
- Separate balanced line driver and receiver stages
- Independent gain and attenuation controls
- Ground lift option (when using shielded CAT5e/6A)
- Integrated mounting brackets
| SKU | ACP-BLX-1K |
|---|---|
| Warranty | 5 Years |
Write Your Own Review
More from AudioControl
