AVProEdge AC-MXNET-SW12 MXnet 1G 12 Port Network Switch

In The Box

• AC-MXNET-SW12 Network Switch
• 1x Power Cable
• 1x RJ45 -> DB9 Console Cable
• 1x Grounding Cable
• 2x Rack Mount Brackets
• 1x Screw Package
• 4x Rubber Pads
• 1x Quick Installation Guide
• 1x Warranty Card
• 1x QC Card

Fast Switching – Nearly instant source-to-source switching from encoders to decoders. MXnet switches sources with the exact timings and same resolution in less than two seconds, with zero visible black frames.

Low Latency – Average audio with video latency time is 35 ms, virtually undetectable to the eye and by ear. Latency varies depending on signal type and matching decoder model. The findings for our latency testing are:

• MXnet Point to Point (HDMI or Decoder Analog Out)
  • Equal to or less than 33 ms (the approximate equivalent of 1 video frame)
• MXnet Encoder (Non-Downmixing/2CH PCM Only)
  • Equal to or less than 1 ms
• MXnet Encoder (AVDM)
  • Equal to or less than 60 ms
  • 60 ms is achieved when downmixing High Bit Rate audio (Dolby TrueHD or DTS Master Audio), though it typically tests as slightly less. Less than 100 ms is considered indistinguishable
     

IAVP (Intelligent A/V Processing) – AVPro Edge has re-engineered every system module for optimization with multicast processing, including a comprehensive reworking of IGMP, Jumbo Frames, Spanning Tree, and multicast filtering.

MXnet NOS (Network Operating System) – Multicast CPU utilization has also been completely reworked, resulting in remarkable data throughput efficiency. 
When the switch is fully populated, processor loads never exceed 40%. 
System boot times are 1 minute and 45 seconds from cold power-up to full operational functionality, including POE device power-up.