SKU# :
914401E
SKU
914401E
Connect your Public Address to your telephone system and use it to make announcements via your mobile phone. 2N® SIP Audio Converter converts the sound from a SIP phone system to the classic analogue form so you can broadcast live or pre-recorded messages over the IP network to any distance.
- Two-way communicator
- Multicast broadcasting
- Using the IP audio features
Skip to the end of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Skip to the beginning of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
2N SIP Audio Converter
Specification
Dimensions and weight - standalone unit 2N® SIP Speaker
Dimensions: 105 x 34 x 86 mm
Dimensions (with L-profiles): 130 x 34 x 86 mm
Weight: 300 g
Output of power amplifier
4 terminals on rear panel, STEREO/MONO with auto detection
Speaker impedance: 4-8O
Amplifier performance: Up to 2x10W depending on connection
Frequency range: 20Hz – 20kHz (+/- 0.5dB)
Harmonic distortion: 0.05% @ 1kHz
Signal to noise ratio: 91dB
External power supply: 12V DC / 1.8A (not included)
LAN power supply: PoE IEEE 802.3af
Status signal: 3x RG LED on front panel
Local control: 3x Button on front panel
Remote control: 1x Infrared detector on front panel
LAN connection: RJ-45 connector on rear panel 10/100BASE-TX with Auto-MDIX function
Earphone/line out: 1x STEREO 3.5mm jack on front panel
Microphone/line out: 1x STEREO 3.5mm jack on front panel
Examples
2N® Network Scanner
The 2N® Network Scanner is a simple, freely available application for locating intercoms from the 2N Helios IP family in the network. After searching the network, the application shows the type, firmware version and IP address of all intercoms found on a chart. This simplifies the administration and installation of intercom systems. Simply run the easy-to-use software to get immediate results.SKU | 914401E |
---|
Write Your Own Review
More from 2N