Araknis Networks Multi-gig PoE+ Injector
SKU# :
AN-POE-INJ-MG-30W
SKU
AN-POE-INJ-MG-30W
This Araknis Networks™ Multi-gig PoE+ Injector is the perfect accessory for connecting a PoE device to a non-PoE switch. Wireless Access Points, IP cameras, control touch pads, and more can be installed with ease thanks to a 30W power output that goes up to 330 feet with a whopping 2.5Gbps of throughput.
Skip to the end of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Skip to the beginning of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Araknis Networks Multi-gig PoE+ Injector
This Araknis Networks™ Multi-gig PoE+ Injector is the perfect accessory for connecting a PoE device to a non-PoE switch. Wireless Access Points, IP cameras, control touch pads, and more can be installed with ease thanks to a 30W power output that goes up to 330 feet with a whopping 2.5Gbps of throughput. Plus, this device features silent operation and built-in mounting ears that allow for maximum placement options.
Fanless
2.5G/Multi-Gig
Compact Design
Plug-n-Play
PoE/PoE+
The Speed and Support You Need
When it comes to large bandwidth and high-speed Ethernet, this PoE+ injector has you covered, thanks to 2.5Gbps throughput and a 30W power output up to 330 ft. It allows you to connect Wi-Fi 6 APs, stream HD and support PoE devices (like surveillance cameras) with minimal latency and maximum performance.
Silent Operation
Thanks to a completely fanless design, this PoE+ injector provides silent operation you and your customers are sure to love.
One-Wire Solution
This injector is the perfect bolt-on solution to add a PoE device to a non-PoE network switch. By combining an Ethernet input with its 54V supply, it creates a simple one-wire solution that delivers 30W of power and 2.5Gbps data to your PoE-enabled device at the other end, such as an IP camera or control system equipment.
Small but Mighty
The palm-sized design is even smaller than its predecessor, and built-in mounting ears allow this injector to go just about anywhere - on the back of a rack, mounted to the wall, or above a dropped ceiling. Its compact and light form factor fits inside our Strong VersaBox, providing a solution that stays cleanly out of sight.
AC > DC
This injector incorporates an AC inlet instead of a DC power supply, which means there’s no need to convert power via wall wart. This handy feature allows for easy access to all ports and a quicker install.
| AN-POE-INJ-MG-30W | |
|---|---|
|
Ethernet Ports
|
Port Speed: 2.5Gbps
Ethernet-IN Port: 1 (data) |
|
POE Ports
|
PoE-OUT Port: 1 (data+power)
PoE Line OUT: 54V DC (max 30W out) |
|
Line Voltage
|
100-240 VAC (0.8A max)
|
|
Supported IEEE
|
IEEE 802.3af; IEEE 802.3at; IEEE 802.3 10BaseT; IEEE 802.3u 100BaseTX; IEEE 802.3ab 1000BaseT
|
|
Certifications
|
FCC
CE cUL US |
|
Features
|
PWR LED
Surge Protection Short-Circuit Protection Built-In Mounting Ears |
|
Operating Humidity
|
5-90%
|
|
Operating Temperature
|
-4-122°F
|
|
Dimensions (W x H x D)
|
2.27" x 1.3" x 3.9"
|
| SKU | AN-POE-INJ-MG-30W |
|---|---|
| Warranty | 2 Years |
Write Your Own Review
More from Araknis Networks
