914401E 2N SIP Audio Converter

Registered trade customers only can see price

SKU# :

914401E

SKU

914401E

Connect your Public Address to your telephone system and use it to make announcements via your mobile phone. 2N^® SIP Audio Converter converts the sound from a SIP phone system to the classic analogue form so you can broadcast live or pre-recorded messages over the IP network to any distance.

Two-way communicator
Multicast broadcasting
Using the IP audio features

Technical Support >>

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

2N SIP Audio Converter

Specifications

Specification

Dimensions and weight - standalone unit 2N® SIP Speaker

Dimensions: 105 x 34 x 86 mm

Dimensions (with L-profiles): 130 x 34 x 86 mm

Weight: 300 g

Output of power amplifier

4 terminals on rear panel, STEREO/MONO with auto detection

Speaker impedance: 4-8O

Amplifier performance: Up to 2x10W depending on connection

Frequency range: 20Hz – 20kHz (+/- 0.5dB)

Harmonic distortion: 0.05% @ 1kHz

Signal to noise ratio: 91dB

External power supply: 12V DC / 1.8A (not included)

LAN power supply: PoE IEEE 802.3af

Status signal: 3x RG LED on front panel

Local control: 3x Button on front panel

Remote control: 1x Infrared detector on front panel

LAN connection: RJ-45 connector on rear panel 10/100BASE-TX with Auto-MDIX function

Earphone/line out: 1x STEREO 3.5mm jack on front panel

Microphone/line out: 1x STEREO 3.5mm jack on front panel

Examples

SIP Speaker-Security

2N SIP Speaker-Warehouse

2N SIP Speaker-ConnectionDiagram

Technical Parameters

Amplifier properties
Amplifier outputs:	4x connector on the rear panel, STEREO/MONO with autodetect
Loudspeaker impedance:	4-8 Ω
Amplifier output:	Up to 2x10 W subject to connection type
Frequency range:	20 Hz – 20 kHz (+/- 0.5 dB)
Harmonic distortion:	0.05% @ 1 kHz
Signal-to-noise ratio:	91 dB
Interfaces
Status signalling:	3x RG LED on the front panel
Local control:	3x Button on the front panel
Remote control:	1 x Infrared sensor on the front panel
LAN connection:	RJ-45 connector on the back panel, 10/100BASE-TX with Auto-MDIX function
Headphone/Line output:	1x 3.5 mm STEREO jack on the front panel
Microphone/Line input:	1x 3.5 mm STEREO jack on the front panel
Power supply
Power from an external source:	12 V DC / 1.8 A
Power over Ethernet:	PoE IEEE 802.3af

Dimensions and weight – standalone 2N^® SIP Audio Converter
Dimensions:	105 x 34 x 86 mm
Dimensions (with L-profiles):	130 x 34 x 86 mm
Weight:	300 g
Operating temperature
Temperature range:	0°C – 50°C