SR-CAB-10U Strong In-Cabinet Racks - 18 inches Depth

Registered trade customers only can see price

SKU# :

SR-CAB-10U

SKU

SR-CAB-10U

SR-CAB-10U Strong In-Cabinet Racks - 18 inches Depth

Support & Downloads >>>

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Strong™ In-Cabinet Rack

Sure, you could just stack gear into a cabinet or place it on shelves... But for an easier and more professional looking installation, use these discreet in-cabinet racks. Their improved design makes them perfect for a built-in cabinet in the living room, boardroom, or light commercial applications.Plus with the optional SR-RACKSLIDE-300 you can easily access the rear panels of the equipment for wiring and servicing - and thanks to a reduced rack depth, you get full rotation to ensure that reaching equipment is a breeze.

Full Rack Rotation

Using a rack slide is great, but if it doesn’t allow the rack to rotate completely, it’s only doing half of its job. We reduced the cabinet depth on this rack by two inches – so it clears the end of the cabinet and allows for full rotation – even when set back to 1.5 inches.

Rail Smart

We silk screened all the rails and in both directions, so whether you’re installing from the top down, on the front, or on the back, you’ll always know the equipment is going into the right location.

Build Quality

When it comes to the strength of your rack, size matters. Top and bottom plates are stamped from a single sheet of 14 gauge steel. Each rack rail is a stout 11 gauge thick. This rack is so strong it is UL listed.

Durable Rotation

Our rack rails use an electrocoating process that is every bit as durable as powder-coating and up to 60% thinner for a perfect fit. The top and bottom covers complement the rails with a durable color-matched, powder-coated finish.

Installer Friendly

Other installer-centric features include a gangable side-by-side (and stackable) design and slots for wire management.

Smooth Operator

Included with each cabinet rack is a low-friction runner kit. Injection molded rails mount to the bottom plate, making it easier to slide the rack for access to the cabling and equipment.

Specifications

Attribute	SR-CAB-8U	SR-CAB-10U	SR-CAB-12U	SR-CAB-14U
Included Hardware	SR-CAB-8U	SR-CAB-10U	SR-CAB-12U	SR-CAB-14U	Assembly hardware	Assembly hardware	Assembly hardware	Assembly hardware
Certifications	UL Certified	UL Certified	UL Certified	UL Certified
Color	Black	Black	Black	Black
Finish	Powder Coat	Powder Coat	Powder Coat	Powder Coat
Maximum Load Support	250 lbs	250 lbs	250 lbs	250 lbs
Construction	Steel	Steel	Steel	Steel
Sold As	Each	Each	Each	Each
Rack Spacing	8U	10U	12U	14U
Dimensions (Width)	19.06" or 484.124 mm	19.06" or 484.124 mm	19.06" or 484.124 mm	19.06" or 484.124 mm
Dimensions (Height)	Racking Height : 14" or 355.6 mm Overall Height : 17.43" or 442.722 mm Height (w/ Sliders) : 17.7" or 449.58 mm	Racking Height : 17.5" or 444.5 mm Overall Height : 20.93" or 531.622 mm Height (w/ Sliders) : 21.2" or 538.48 mm	Racking Height : 21" or 533.4 mm Overall Height : 24.43" or 620.522 mm Height (w/ Sliders) : 24.7" or 627.38 mm	Racking Height : 24.5" or 622.3 mm Overall Height : 27.93" or 709.422 mm Height (w/ Sliders) : 28.2" or 716.28 mm
Dimensions (Depth)	18.2" or 462.28 mm	18.2" or 462.28 mm	18.2" or 462.28 mm	18.2" or 462.28 mm
Usable Depth	18 inches or 457.2 mm	18 inches or 457.2 mm	18 inches or 457.2 mm	18 inches or 457.2 mm

More Information
SKU	SR-CAB-10U
U-Height	10
Warranty	2 Years