SR-RACKSLIDE-300 Strong Rack Sliding Base for In-Cabinet and Contractor Series Racks
SKU# :
SR-RACKSLIDE-300
SKU
SR-RACKSLIDE-300
Strong Rack Sliding Base for In-Cabinet and Contractor Series Racks
Skip to the end of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Skip to the beginning of the images gallery
- Contact Us : Tel: +44 (0)1296 719 582 / Email: sales@aldoussystems.co.uk
Designed for use with our Strong™ Contractor Series Racks, this smart rack slide saves your back and neck by giving you easy access to equipment when installing it into a cabinet.
Strong™ Rack Sliding Base for In-Cabinet and Contractor Series Racks
Designed for use with our Strong™ Contractor Series Racks, this smart rack slide saves your back and neck by giving you easy access to equipment when installing it into a cabinet.
Important Note - The SR-RACKSLIDE-300 will add 2.56" to the height needed for the rack installation. Be sure to account for this in your cabinet design.
Strong Rails
Even though the main point of the railing system isn't to permanently hold the rack at an extended position, it's important that they look and feel Strong. Built with 16 gauge steel, the 4 slides are beefy enough to hold up to 300 lbs full extended. And with ball bearing glides, you can count on a nice, smooth ride.
Easy to Move
Get your gear on the move easily with this sliding and rotating shelf. When installing or servicing equipment you can also secure it with two locking features. The first is a rotation lock for 0, 60 and 90 degrees from center stops to keep it stationary and not twist. The second is a glide lock to prevent accidentally sliding the rack back if you push on the front.
Good Rotation
Sure sliding the rack out is easy, but then what? Since you need to get to the back to connect wires, check wires, possibly reposition equipment, etc, the base of the slide sits on an aluminum "lazy-susan" so you can easily spin the rack around.
Simple Installation
Installation couldn't be any easier - simply mount the shelf in the cabinet then bolt on the assembled rack. We've even included a cover plate that dresses up the front and hides the lockouts from prying fingers.
| Attribute | SR-RACKSLIDE-300 |
|---|---|
| Included Hardware | Blank Security Cover Panel, (2) attachment panels, attachment screws |
| Swivel | 90 |
| Color | Black |
| Dimensions (W x H x D) | 20.16" x 2.56" x 19.87" (512.064 mm x 65.024 mm x 504.698 mm) |
| Finish | Powder Coat |
| Maximum Load Support | 300 lb |
| Construction | Steel |
| Sold As | Each |
| Weight | 42.5 lb |
| SKU | SR-RACKSLIDE-300 |
|---|---|
| Warranty | 2 Years |
Write Your Own Review
More from Strong
